Quality & Testing

5 Maintenance Practices That Extend Roller Chain Life

Simple, practical maintenance habits that help industrial roller chains last longer and reduce unplanned downtime. By Galaxy Chains Pvt. Ltd., Shapar, Rajkot

5 Maintenance Practices That Extend Roller Chain Life

Simple, practical maintenance habits that help industrial roller chains last longer and reduce unplanned downtime. By Galaxy Chains Pvt. Ltd., Shapar, Rajkot.

A roller chain is a small part of a machine, but when it stops, the whole line stops. Most chain failures can be avoided with a few disciplined habits.

1. Lubricate on schedule. Lubrication keeps the pins and bushes from wearing against each other. Use the lubricant and method suited to the speed and load, and do not wait for the chain to look dry.

2. Keep sprockets aligned. Misaligned sprockets push the chain sideways and wear the plates and rollers on one side. Check alignment with a straight edge whenever a chain or sprocket is changed.

3. Maintain correct tension. A chain that is too tight overloads the bearings and shafts. A chain that is too slack can jump teeth and whip. Follow the sag recommended for your drive.

4. Measure elongation regularly. All chains stretch as pins and bushes wear. Measure the chain at set intervals and replace it once elongation reaches the limit for that chain type.

5. Replace chain and sprockets together. A new chain on worn sprockets wears out quickly. Changing both together protects your investment.

Built to last from the start

Galaxy Chains has manufactured industrial roller chains from 0.5" to 2.5" pitch since 1991, and our ISI marking is approved by BIS as per IS Standard. Good maintenance on top of a well-made chain gives the best service life.

Need advice on your drive? Call 9099932799 or send us an enquiry through our website.